Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
Multi-use Re-washable Medical Grade PPE (NFPA 1999: 2018 complied) : Use it for 30 days in high risk; 45 -90 days in moderate risk and for one functional year in low risk infectious areas.
Barrier layer prevent entry of virus even 4 times lesser than COVID-19 as per ASTM 1671 compliance.
Fabric has high water vapour transmission rate (g/ m2/ 24 h) even 100 units higher than standard as per ASTM E 9600 method BW.
Fabric each layer has 02 times breaking resistant strength in both directions as compared to standard of ASTM D 5034-09 (2013).
Each layer of fabric has 4 times bursting resistant strength than standard as per ASTM D 3787-07 (2011) making it compatible for multiple wash.
Fabric layers exhibit 02 times tear resistance in both directions as compared to standard of ASTM D 5587.
Fabric layer resists 1.5 times higher than required standard in preventing tear propagation as per ASTM D 2582.
Outer layer of fabric is able to resist water applied with pressure of 10 Psi for 10 min with no inward leakage as per CAN/CGSB-4.2N0 26.5-M89 (2013)
Protecton's fabric showed total heat loss (W/m2) ~100 units higher than required standard of Part C of ASTM F 1868. It provides cooling effect.
Protecton fabric evaporation resistance is limited within 30 Pam2/ W as per requirement of Para 2 of NFPA 1999:2018.
Each layer showed no ignition while tested as per methodology of ASTM D1230-10 (2016) e1.
Protecton exhibited successful of maintaining water absorption within limits as per requirement of Para 8.42 of NFPA 1999: 2018. It provides compatibility for multiple wash.
Protecton complied with all requirements of NFPA 1999: 2018 fulfilling it's ability to be used as multi-use PPE in repetitive manner.
Tested against Phi X 174 bacteriophage (4 times smaller than COVID-19) highly efficient in prevention of entry of virus.
Sterility Assurance Level of 10-6 is achievable in each repeat cycle using Ultraswachh PPE Disinfection Device (Tri-Netra Multi-Product).
Wash it in laundry as per EN ISO 6330: 2012 6N Procedure - tested multiple times and provided instructions on packaging.
Copyrights held by Gel Craft Healthcare Private Limited, 2021